Check engine light says never turn it off and ignore
it but fix the issues to your engine
For a car owner, a
glowing check engine light could be a sign of a very dangerous condition
arising under the bonnet. It is one that must not be ignored at any cost and
problem must be identified due to which the engine light turned ON.
When the check engine light
comes on, it usually gives very bad feelings and the ON light could mean a
serious and costly problem, it might be a malfunction of the catalytic
converter or an oxygen filter or might be a smaller issue. You might know that
a loose fuel tank cap also triggers the engine light and left it ON. Any of
these issues or might be any other bigger issue, you must visit your dealer to
examine the engine functions and detect the problem. Continue to read more
about different engine. Visit us at apexengines.co.uk first
Decoding the error code
The inexpensive engine codes
are also available in the market these days that connect to the onboard
diagnostic port to find out the reason that why the engine light has turned on.
There are some code readers who automatically turn the engine light off without
repairing the engine problem and in many such cases when drivers try to turn
the engine light off without repairing, they stuck in big issues by the time.
What did my check engine light say?
Many drivers confused
between service required an engine check light and they keep going for many
miles which ultimately stuck them in big issues.
There are three colors of
the check engine light, yellow, orange, and umber. All depends on the
manufacturers. If check engine light starts flashing, it indicates that your
engine is facing some serious issues and they need instant attention. Such as
if your engine is facing serious issues e.g. misfiring, it can easily overheat
the catalytic converter and engine light will turn on. The faulty catalytic
converter can pose a serious risk of fire. We offer best quality used and reconditioned engine
in all over UK.
The Check Engine light
The check engine light is more formally indicates any malfunction of any engine part or any engine system and it turns ON as a MIL [malfunction indicator lamp] a signal from the engine computer. The computer indicates that it is facing any issues in one or more systems. The dealership diagnoses the engine to identify the problem and apply a fix.
Since 1996, car makers have their own diagnostic systems and they make sure that their car is complying with the majority of environmental protection agency regulations and requirements. Since 1996, all the car computer systems are working under the OBD II protocol which has its own standard list of error codes to diagnose the trouble or issue. This protocol also mandated that every car after 1996, must provide a universal connector to access the information on the board of the car.
Companies are offing this universal access point port under the steering column and dealers and car mechanics easily access the vehicle information from that point.
Don't Ignore That Light
In case if check engine
light is ON but it is stable rather than flashing, then the most obvious action
is to visit the mechanic or service center and get the engine diagnosed. But
the majority of drivers ignore this issue and do nothing in this regard just
fearing the massive repair bills. Some drivers who have older cars they usually
plan to squeeze every mile out of the engine before dumping the car.
In the case of a steady
light, the most obvious answer, of course, is to get the engine checked. But
many people do nothing, perhaps fearing off an expensive repair bill.
If the light is turned ON,
there might be a great chance that the engine is polluting the air more badly
and it is sipping more fuel than usual. In this condition, inspection and
diagnose of the issue help the driver to save on fuel as well.
What is the actual situation?
A car magazine has a survey
on vehicles and they claimed that more than 10 percent cars in the roads have
their Check Engine light lit and the drivers of those cars have ignored the
situation for more than months. A car error code readers selling company says
that the stats from the survey looks accurate because they have also studied
the market and found that people ignore the engine light or even try to turn it
off without diagnosing the issue and repairing it.
The company isn’t alone in
the code readers market but if you will try to enquire online, there will be
hundreds and thousands of companies who are involved in this business of
selling code readers. But it is still very easy to locate the engine code
through Google.
What did experts say?
A director of the vehicle
testing system manufacturing company points out that the vehicle systems are
primarily designed to continuously monitor the engine performance and its
emissions systems and they work over the life of the car. He further says that
the engine performance and emission controls are exclusively interlinked. When
system monitors the health of the engine’s emissions system, it also gets a
better idea of the engine health.
The chief automotive
engineer from a firm working in California, says that the engine light leaves a
really depressing effect on the driver’s mind as well. When the light glows
out, the majority of the drivers freaks out that it will cost them a massive
bill in repairs, others just put a piece of black tape on the light, however,
there are many of then buy a code reader and try to cheat the system by turning
the light off. He says that it is important to diagnose the problem and fix it
as soon as possible. Because it will save you from costly repairs later on.
If
the engine light is ON,
first check your fuel tank cap, if it is loose, tighten the cap and keep
driving, after tighten the cap wait for 30 minutes or some more, if the light
is still ON, visit your nearest garage and diagnose the problem
No comments:
Post a Comment